Superior Trim Solutions

Superior Flooring offers a variety of mouldings in our various hardwoods and finished to transtion your hardwood floor to the other surfaces in your house.

 

Other Products

¾” Stair Nosing

Designed for use as an edge transition when on stairs, podiums or landings; stair nosing can sometimes be referred to as a bull nose.
Standard length of 7'. Available in 8' lengths by special order.

A B C D
3/4" 4" 1" 1 1/4"
19mm 108mm 27mm 38mm

¾” Stair Nosing Square Profile - Custom Order 1-2 Weeks

Designed for use as an edge transition when on stairs, podiums or landings.
Standard length of 7'. Available in 8' lengths by special order.

A B C D
3/4" 4 1/4" 1" 1"
19mm 108mm 27mm 27mm

½” Stair Nosing Round - Custom Order 1-2 Weeks

Designed for use as an edge transition when on stairs, podiums or landings; stair nosing can sometimes be referred to as a bull nose.
Standard length of 7'. Available in 8' lengths by special order.

A B C D
1/2" 3 1/8" 7/8" 1 1/8"
13mm 79mm 22mm 29mm

½” Stair Nosing Square - Custom Order 1-2 Weeks

Designed for use as an edge transition when on stairs, podiums or landings.
Standard length of 7'. Available in 8' lengths by special order.

A B C D
1/2" 3 1/8" 3/4" 1 1/8"
13mm 79mm 19mm 29mm

¾” Vinyl Edge Reducer

This moulding is used as a transition to floors of a lower height than hardwood such as vinyl or concrete. They are sometimes used around fireplaces and as a design feature, as well as a functional edge reducer.
Standard length of 7'. Available in 8' lengths by special order.

A B
3/4" 2 1/4"
19mm 57mm

½” Vinyl Edge Reducer - Custom Order 1-2 Weeks

This moulding is used as a transition to floors of a lower height than hardwood such as vinyl or concrete. They are sometimes used around fireplaces and as a design feature, as well as a functional edge reducer.
Standard length of 7'. Available in 8' lengths by special order.

A B
1/2" 1 1/2"
13mm 38mm

¾” Carpet Reducer

Used to transition from 3/4" hardwood floors to lower vertical heights such as carpet or ceramic tile.
Standard length of 7'. Available in 8' lengths by special order.

A B C D
3/4" 13/32" 23/64" 2 7/16"
19mm 10mm 9mm 62mm

1/4" Round - Custom Order 1-2 Weeks

 

A B
3/4" 3/4"
19mm 19mm

T-Mould

T-Moulding serves as a connector between two floors of equal height. Although primarily used for transitioning from hardwood to hardwood, it can also be used to move from hardwood to other surfaces such as tile.
Standard length of 7'. Available in 8' lengths by special order.

A B C D
3/4" 2" 3/8" 5/8"
19mm 44mm 9mm 10mm

 


Flush Mount Vents - Custom Order 3-4 Weeks

Flush style vents sit flush with hardwood flooring and are required during the installation of your floor. All sizes are based on the standard HVAC duct opening.

Available Sizes
2 1/4" x 10" 2 1/4" x 12" 2 1/4" x 14" 3" x 10" 4" x 10"
4" x 12" 4" x 14" 6" x 10" 6" x 12" 6" x 14"

Top Mount Vents - Custom Order 3-4 Weeks

Top Mount or Self Rimming style vents require no installation and sit on top of the prefinished hardwood floor. All sizes are based on the standard HVAC duct opening.

Available Sizes
2 1/4" x 10" 2 1/4" x 12" 2 1/4" x 14" 3" x 10" 4" x 10"
4" x 12" 4" x 14" 6" x 10" 6" x 12" 6" x 14"