Mouldings,
Nosing
& Vents
Superior Trim Solutions
Superior Flooring offers a variety of mouldings in our various hardwoods and finished to transition your hardwood floor to the other surfaces in your house.

3/4" Stair Nosing Square Profile - Custom Order/Ship Direct
Designed for use as an edge transition when on stairs, podiums or landings.
Standard length of 7′. Select species available in 8′ lengths by special order.
A | B | C | D |
---|---|---|---|
3/4" | 4 1/4" | 1" | 1" |
19mm | 108mm | 27mm | 27mm |
84" Length |

3/4" Vinyl Edge Reducer - Custom Order/Ship Direct
This moulding is used as a transition to floors of a lower height than hardwood such as vinyl or concrete. They are sometimes used around fireplaces and as a design feature, as well as a functional edge reducer.
Standard length of 7′. Select species available in 8′ lengths by special order.
A | B |
---|---|
3/4" | 2 1/4" |
19mm | 57mm |
84" Length |

3/4" Carpet Reducer - Custom Order/Ship Direct
Used to transition from 3/4″ hardwood floors to lower vertical heights such as carpet or ceramic tile.
Standard length of 7′. Select species available in 8′ lengths by special order.
A | B | C | D |
---|---|---|---|
3/4" | 13/32" | 23/64" | 2 7/16" |
19mm | 10mm | 9mm | 62mm |
84" Length |

1/4" Round - Custom Order/Ship Direct
A | B |
---|---|
3/4" | 3/4" |
19mm | 19mm |

T-Mould - Custom Order/Ship Direct
T-Moulding serves as a connector between two floors of equal height. Although primarily used for transitioning from hardwood to hardwood, it can also be used to move from hardwood to other surfaces such as tile.
Standard length of 7′. Select species available in 8′ lengths by special order.
A | B | C | D |
---|---|---|---|
3/4" | 2" | 3/8" | 5/8" |
19mm | 44mm | 9mm | 10mm |
84" Length |

Flush Mount Vents - Custom Order/Ship Direct
Flush style vents sit flush with hardwood flooring and are required during the installation of your floor. All sizes are based on the standard HVAC duct opening.
Available Sizes | ||||
---|---|---|---|---|
2 1/4" x 10" | 2 1/4" x 12" | 2 1/4" x 14" | 3" x 10" | 4" x 10" |
4" x 12" | 4" x 14" | 6" x 10" | 6" x 12" | 6" x 14" |

Top Mount Vents - Custom Order/Ship Direct
Top Mount or Self Rimming style vents require no installation and sit on top of the pre-finished hardwood floor. All sizes are based on the standard HVAC duct opening.
Available Sizes | ||||
---|---|---|---|---|
2 1/4" x 10" | 2 1/4" x 12" | 2 1/4" x 14" | 3" x 10" | 4" x 10" |
4" x 12" | 4" x 14" | 6" x 10" | 6" x 12" | 6" x 14" |